login   |    register

In-Box Review
Sd.Kfz.8 DB10 Review
Trumpeter German Sd.Kfz.8 DB10 Gepanzerte 12t
  • move

by: Kevin Brant [ SGTRAM ]


The Sd.Kfz.8 Half-Track was a widely used vehicle in the German Army. The vehicle was produced by Daimler-Benz, starting in 1931-32. It went through a few versions, with the DB10 being the version adopted, and produced during the entire war. There were approximately 4000 produced. The primary role was for towing heavier guns, like the 21cm Morser, 15cm Kanone, 10.5cm Flak 38, and of course the famous 8.8cm Flak. The version depicted in this kit is an amoured version.

Arriving as it did in a fairly large box, I was excited. Opening the box, I was even more excited to find it chock-full of sprues carefully packed, and individually contained in their own plastic bag.

The box contains 12 sprues of tan molded plastic, not including the top and bottom hulls, which are in their own plastic bags that were packed well in a cardboard separation at the end of the box. There are 10 sprues of "workable" track that will need to be assembled. Also included are a fret of photo etched, a small piece of copper wire, 4 rubber tires, and a small sheet of decals, including a decal for the dash. As for instructions, there is a 20-page, 19-step, booklet, and a colored sheet showing the single paint scheme for the vehicle.

The hull is molded in two parts, lower and upper. The moldings are crisp and flash free. There are some ejector marks, and while most look like they will be hidden, there are some that will need a little sanding. The floor anti-slip plate is molded into the bottom section of the hull.

The molding on the road wheels is exquisite. The holes are sharp, flash free, and the appropriate raised detail is well presented. The kit does come with the full motor and gear box, molded across 2 sprues, and some parts with the lower frame. Again the moldings are sharp and flash free, including the fine detail pieces.

The upper hull and interior detail are also well molded, with raised rivet detail and clean and crisp details. The wood grain looks to be well molded for the seat parts, and should make simulating the painted wood seats easier. The dash has a nice molded face, and I am not sure how the provided decal will sit, but it may not be too bad.

One thing that really amazed me was that the included MG 34 had the sights molded on in plastic. Now how is that for detail? Speaking of detail, there is one fret of PE, which looks mostly to be some brackets and tie downs.

The kit comes with 2 set of tires with two different tread patterns. I believe it would require a little research to ensure which pattern to use. As for the tracks, they are molded in a little darker plastic, and contain fine pieces that will need to be assembled. The parts look clear and useable with very little clean up.

There is a small sheet of decals, which include the dash, name plate and license plates. Printing of the decals looks sharp and in register.

The instructions are printed in a small booklet format, with black printing on white paper. Printing is very clear and readable. The instructions are broken down into 19 steps on 20 pages. While mostly well laid out, I found some steps a little busy, especially the frame layout, which may take a little work to ensure it is square.

The instructions break down as follows:

Step 1 - Gear box
Step 2 - Engine
Step 3 - Front wheels, drive sprocket, and lower frame.
Step 4-6 - Install engine, add exhaust, steering parts, and suspension
Step 7 - Add remainder of frame parts, assemble road wheels
Step 8 - Install road wheels and track
Step 9-10 - Start adding pieces to exterior lower hull, build seats
Step 11 - Construct and add exterior stowage to lower hull
Step 12 - Mount lower hull on to frame and add firewall
Step 13-15 - Construct and mount interior detail and stowage
Step 16-17 - Add exterior detail to upper hull
Step 18-19 - Mount upper hull, add remainder of the detail

There are some paint call-outs, but as most of vehicle is a standard color, I would not expect a lot.

A single color sheet shows the paint scheme and markings location placement. All colors are provided for Mr. Hobby, and a few options for some colors from Vallejo, Model Master, Tamiya, and Humbrol. The markings represent a Luftwaffe vehicle that towed an 8.8cm Anti-aircraft gun.

Overall this seems to be a great kit. As usual with most Trumpeter kits of late, great molding, well detailed, and sharp. The interior detail looks like it will build up very nice, with no extra work required. For me, I am looking forward to building this great looking kit.

Follow me as I build this kit as a Build log. And maybe I will have to find an appropriate flak gun to build and add behind it.
Highs: Crisp and clean molding, well detailed.
Lows: Limited markings, instructions a little busy.
Verdict: Great kit. Definitely recommend.
Percentage Rating
  Scale: 1:35
  Mfg. ID: 01584
  Related Link: 
  PUBLISHED: Apr 16, 2012

Our Thanks to Stevens International!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Kevin Brant (SgtRam)

I am an IT Consultant and father, with a passion for plastic models. I mostly prefer 1/35 Armor and 1/48 Aircraft. My main interests are anything Canadian, as well as WW2 German and British Armor and Aircraft. I have been building models since I was a young kid, got away from it for awhile, but r...

Copyright 2021 text by Kevin Brant [ SGTRAM ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Historicus Forma or Silver Star Enterprises. All rights reserved.


Thanks, Kevin. This is most likely a Late War variant of the 8, typical of German halftracks as the war dragged on and pesky things like small arms fire made riding/driving one more hazardous. I have seen photos from France 1940 of an Sd.Kfz.7/1 with armored cab, but these were apparently special Luftwaffe AA units. In any case, this means all the major German halftracks are now in styrene. I hope Trumpy will bring out a plain "vanilla" version with the open cab.
APR 16, 2012 - 08:52 AM
Thank you very much Kevin, for this overview.
MAR 08, 2013 - 01:49 PM
(entered too fast ...) I'm building it right now and I'm pleasently surprised of the good fitting of parts. The booklet could be a little more clear, when it comes to substages of specific parts which are assembled to the chassis/hull. There are no MG34's concluded i this kit, but 2 nice moulded MG42's are ! Right now I try to find out what are the contents of the different stowage-boxes within and outside the vehicle ...
MAR 08, 2013 - 01:54 PM
These are cool beasts and I could only wish to getting around to building one some day as part of a late-war dio.
DEC 29, 2016 - 09:08 AM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move